Product ID:FC2207-FO, COLOR FC2207 OR COLOR PRINTER (SUPDAT)
MSDS Date:02/26/1990
FSC:6850
NIIN:00N049298
MSDS Number: BVCSQ

Emergency Phone: 404-840-6500

Info Phone: 404-840-6500

Cage: CLRCS

Telephone: 404-840-6500

Cage: CLRCS

DIMETHYL POLYSILOXANE (NON HAZARDOUS)

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:LD50:5,000 MG/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: TRANSIENT WEAK IRRITATION. SKIN:
NON-IRRITANT. INHAL: ESSENTIALLY NON-TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: REMOVE LIQUID FROM SKIN W/A DRY TOWEL AND WASH EXPOSED
AREA W/DETERGENT. EYE: IMMED FLUSH WITH WATER FOR AT LEAST 15
MINUTES. INHAL: REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE O*2/ARTF
RESP) (FP N ). INGEST: CALL MD IMMED .

Flash Point:>204F,>96C
Extinguishing Media:CO*2, DRY CHEMICALS, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL HAS NO UNUSUAL
FIRE/EXPLOSION HAZARDS.

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT AND CONTAIN
FLUID FOR SALVAGE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS ARE
NEEDED FOR SAFETY REASONS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKS GOGGS .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR TRADE NAME/PART #: CP4007 FUSER OIL.

Spec Gravity:0.97-0.98
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS, TRANSPARENT, ODORLESS FLUID

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SIO, CO*2 AND TRACES OF INCOMPLETELY
BURNED CARBON PRODUCTS.

Waste Disposal Methods:INCINERATE IN COMPLIANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.